corsair hydro series h80i v2 liquid cooler

#Corsair hydro series h80i v2 liquid cooler install

Step 5: Connect Fan and Pump Power Cables With all four screws installed, the H80i GT should now be securely mounted to the interior of your case.

#Corsair hydro series h80i v2 liquid cooler install

Screw it into place, then install the remaining screws. Push one of the long screws through the rear of the case and one of the mounting holes of the second fan, with the fan struts facing the back of the case to allow hot air to exhaust safely outside your system. Step 4: Attach 2 nd Fan and Radiator to Case Use the included thumbscrews to secure the block, alternating corners in the same fashion you would remove or replace lugnuts on a tire. Note that there’s a silver disc of thermal interface material already applied to the underside of the block. The first thing we need to do before mounting the cooling block is remove the protective plastic cover. You’ll always be able to tell which direction a fan blows by which side of the fan has the struts this fan is oriented to push air through the radiator. Using the long screws included with the H80i GT, attach the fan to the radiator, orienting the fan struts to the inside. We’ll need to prep the radiator for installation inside your case. The backplate may be a little bit loose even with all four screws installed this is normal. Next, use the silver standoff screws and insert them into the backplate. If you prefer video instructions, you can watch our guide on YouTube here:įirst, adjust the notches on the backplate and push the standoffs through the back of the motherboard. This step by step guide should help you install it on any Intel LGA115X platform. The new Hydro Series H80i GT cooler offers tremendous performance while requiring only a 120mm fan mount.